您需要下载最新版的Flash player播放器 点击下载!

关于辉隆

Headquarters
Add: No.12, Defa Road, High-tech 
Development  Zone, Jiangmen, Guangdong, China
Tel:+86 750 3866989
Fax:+86 750 3866987
E-mail:hl@huilongpm.com
Shanghai Office
Tel:+86 21 62193369
Fax:+86 21 62193369
E-mail:david_chiu@huilongpm.com

 
凝聚科技光辉 成就行业兴隆

 

Memorabilia

In 1996, the predecessor Jiangmen Jianghai Huilong Plastic Machinery Co., Ltd. was established.
In 1997, Huilong began to manufacture home-made high-speed extrusion laminating machines by the deep research on extrusion technologies and overcoming various technical problems.
In 1998, Huilong succeeded in producing the extrusion laminating machines with the speed of 120m/min which main performances had reached to the technical level of the same products imported from abroad.

In 2001, Huilong built the system combining learning with research and production by cooperating with Industry Equipment and Control Research Institute of South China University of Technology. It has stepped into the high-speed development road since it received the technical supports from the university.
1n 2001, single-layer & double-coupler extrusion laminating machines were released.
In 2001, Huilong began to research pre-coated extrusion technology and equipment.
In 2002, the success in the research of pre-coated extrusion technology and extrusion laminating machine promoted the development of domestic pre-coated market. Huilong pre-coated extrusion laminating machines had accounted for 80% in the pre-coated market.
In 2002, Huilong started to research single-head * double-layer extrusion laminating machines and low-energy dynamic extrusion laminating machines. Meanwhile, it adjusted the normal production speed to 150m/min by improving the core components of extrusion laminating machines.

In 2003, Huilong removed to Jianghai Hi-tech Zone, Jiangmen City of Guangdong province, registered as Jiangmen Huilong Plastics Machinery Co., Ltd.
In 2003, Huilong successfully manufactured the low-energy dynamic extruder which can save 40 percent of electricity under the same condition. Its low operation cost creates advantages for customers to make profit.
In October 2003, double-layer extrusion laminating machines researched and developed independently by Huilong debuted, which created a new era of co-extrusion laminating market.
In 2003, the extruder with the normal speed of 200m/min was launched.
In 2003, the multi-layer laminating material production line (three-coupler extrusion laminating machines) for liquid food designed and manufactured by Huilong was put into operation. All laminating materials it produced completely met the usage requirements of “Lile” filling production lines.
In 2003, Huilong single-layer extrusion laminating machines were exported to abroad.

In 2004, full digital control double-coupler extrusion laminating machines were released.
In August 2004, Huilong was awarded as “The Cooperation Unit of Industry Equipment and Control Research Institute of South China University of Technology” by South China University of Technology. Two parties started to cooperate in the extrusion laminating field in the way of combining learning with research and production.
In December 2004, Huilong was certificated by ISO9001:2000 Quality Management System.

In 2005, Huilong successfully enhanced the extrusion laminating machines’ peeling strength which was in the range of 1-2N/15mm by using resin to recombination (Namely, “Sandwich” Laminating) when OPP, BOPET, BOPA and CPP, M-PET passed through the middle layer.
In 2005, Huilong began to research and develop single-head and three-layer co-extrusion laminating machines.
In 2005, Huilong started to export co-extrusion laminating machines and double-coupler co-extrusion laminating machines to Japan and other developed countries.
In June 2005, Huilong was named as “Guangdong Private Scientific and Technical Enterprise”.

In 2006, Huilong released single-head and three-layer co-extrusion laminating machines.
In April 2006, Huilong was evaluated as “Top 10 Enterprises with Credible Services” by China Packaging News and www.pack.cn.
In June 2006, Huilong was awarded as “The Enterprise with Best Trust and Assured Quality” by China Quality Leading Enterprise Expert Assessment Committee.

In May 2007, Huilong developed extrusion laminating machines with rollers which can actively roll (Namely, India Alcan Machine). It was adopted by Alcan Packaging, the leader of the international packaging industry firstly.
On 24 Aug, 2007, the project of “The R&D on the key equipment and technology for shaping high-performance polymer packaging material based on chaotic mixing”, cooperated by Huilong and South China University of Technology, was granted “the Second Award of Guangdong Scientific and Technological Progress in 2007” by the Ministry of Education (Ref. 2007-257). The chaotic mixing and low-energy extrusion laminating machine’s power is 0.17 kW/ (kg/h), almost one half of China standard which is 0.32 kW/(kg/h). It can obviously save the energy, which is a creation in the world. The overall technology has approached the internationally advanced levels.
In October 2007, Huilong became the Engineering Technology R&D Center, Jiangmen City.
In November 2007, Huilong became the demonstration base of Education Department of Guangdong Province which combines learning with research and production —“The R&D Base of Chaotic Mixing Low-energy Extrusion Laminating Machines”.

In 2008, Huilong set out to research single-head and five-layer extrusion laminating machines and multi-head and coupler extrusion laminating machines. It applied for the provincial, urban and regional scientific and technical project about “The R&D on the key equipment and technology for shaping high-performance polymer packaging material based on chaotic mixing”.
In May 2008, Huilong successfully developed high-speed extrusion laminating machines with the speed of 300 m/min and exported to India.
In January 2008, Huilong was praised as “Model of China Enterprise Credit Authentication System (Five-star)” and “China Renowned Enterprise (Three-star)” by China Internet Information Center.

In Feb 2008, Huilong was approved by ISO9001:2000 Quality Management System for its renewal of certificate.
In Feb 2008, Huilong was awarded as “Excellent Learning-type Organization” by Research and Development Center on Privately Firms in the Pearl River Delta of Guangdong Province and Fushan Sunshine Education and Training Center.
In March 2008, Huilong gained CE certification and all products have been labeled with CE logo and entered into the international market.
In March 2008, Huilong became the member of Guangdong Packaging Technical Association.
In September 2008, Huilong became the post-doctoral scientific research base of the post-doctoral scientific research station of South China University of Technology.
In September 2008, Huilong successfully developed φ100 extrusion laminating machines (Guangzhou Hongming) and its screw, and 2,300mm laminating machines.
By November 2008, Huilong had possessed 20 technical patents. At that time, it was praised as “The Intellectual Property Demonstration Enterprise of Jiangmen City” granted by Intellectual Property Office of Jiang City.

On November 6, 2008, the Ministry of Science and Technology issued the Notice about issuing 2008-2009 National Scientific and Technical Plan Project (Ref:[2008]685) which confirmed and approved “Chaotic Mixing Low-energy Extrusion Laminating Machine” developed by Huilong as “2008-2009 National Key New Product Plan Project” (Ref:1275 and Project No: 2009GRE00024). It is said that it was the only project in Jiangmen City, even in the extrusion plastics packaging industry, which was listed in the 2008-2009 National Key New Product Plan Project.
On November 21, 2008, the project about “Dynamic Energy-balancing & Energy-saving Plastic Extruder”, studied collectively by Huilong and South China University of Technology, received “The First Award of Science and Technology in 2008” in Jianghai District, Jiangmen City.

In December 2008, Huilong became the member of China Packaging Federation.
On December 13, 2008, the establishment meeting of the plastic film workgroup created by National Rubber & Plastics Machinery Standardization Technology Committee and Rubber & Plastics Machinery Standardization Sub-technology Committee was held in Shishan Town, Foshan City, Guangdong Province. Huang Weilun, vice general manager of Huilong, was invited to participate in the meeting and Huilong was appointed as the member of National Rubber & Plastics Machinery Standardization Technology Committee.
On December 30, 2008, the Jiangmen city government held the commendatory meeting to praise the excellent workers. Xue Minghong received the award of “Jiangmen Outstanding Worker”.
In December 2008, Huilong set out to develop “the production line of high-performance & low-energy 10-layer three-coupler co-extrusion pulp-molded aluminium soft packaging materials”. And in Feb 2009, it made a great success and sold the production line to the large domestic packaging enterprise.

In June 2009, Huilong received the new certificate of CE.
On 24 July 2009, the project of “The R&D on key co-extrusion laminating equipment and technology of high-performance & low-energy soft packaging materials”, cooperated by Huilong and South China University of Technology, was granted “The Second Award of Guangdong Scientific and Technological Progress in 2008 in 2008” (Ref. B03-0-2-03).
In August 2009, Huilong was approved by ISO9001:2000 Quality Management System for its renewal of certificate.
In August 2009, Huilong received 8 paten certificates. So far, Huilong had submitted 20 paten applications and 16 had been approved.
On August 25, 2009, Huilong received the approval from the Department of Science and Technology of Guangdong Province about the application of “The R&D on the production line and key technology of high-performance & low-energy co-extrusion pulp-molded aluminum soft packaging materials”.

Development Outlook
n 2010, Huilong will apply for the well-known brand in Guangdong Province and China.
In 2010, Huilong will invest and finish the research on single-head and five-layer extrusion laminating machines.
In 2011, Huilong will be become the internationally famous brand and the biggest manufacturer in producing and selling high-end extrusion laminating machines in the world. The annual growth will be 20%, while the export share will take up 70%.
In 2011, Huilong will complete the research and development on multi-coupler & multi- head extrusion laminating machines.
In 2012, Huilong will become the first listed company in the extrusion field.
In 2012, it will build the biggest and best R&D center in Chinese extrusion laminating machine field. The patents will be no less than 30, and the core-technology patents will be more than 10.
In 2015, its technologies will keep No. one for eight consecutive years at home and be the leading position abroad.
In 2016, it will become the international marketing center which will be in charge of worldwide marketing management.

In 2017, it will become the world-class manufacturer, producing high-end laminators, with the first-level management, technologies, qualities and services.